Local California Time: 
Customer Service available until 2pm

Browse Categories

Price Ranges

      Products Are:

Made in USA

 Follow on Youtube

If you've shopped here
before, rate this store!
<script src="http://www.google-analytics.com/urchin.js" type="text/javascript"></script><script type="text/javascript">_uacct = "UA-2530730-1";
 Installation of our display systems is easy!
Your collection will be displayed in minutes with just a few simple steps:
1) If possible attach top section to wall before assembling the rack !

a- Locate 2 studs in wall, mark location.
b- Mark location on 2 rack sections in the drill guide, these will be the top and bottom sections. Drill 1/8" holes for screws in rack.
c- Level and use screws to mount top section to wall.

2) Slide together the rest of the sections. Make sure the second drilled section is on the bottom. Use two strips of masking tape on the back of the rack to keep the sections from sliding. (fig. 2)

3) Slide the assembled sections onto the top rack section already mounted to the wall.

4) With rack hanging on wall install bottom screws. Screws should be placed every ten sections.

5) Place collectables in display, slide in plastic dust window (Remove blue protective film first) and put on end caps.
You must have Acrobat®Reader®installed to view the following:
View/Print Installation Instructions for Series 1000, 2000, 3000             
View/Print Installation Instructions for Series 4000, 5000, 6000 & 7000    View/Print Large Assembly Instructions